E-LENE is a professional and food certified 3D filament with special properties.

> Data sheet E-LENE

Printing E-Lene Polyethyleen:

• Working Temperature 235 - 250°C
• Heated bed 30 - 60°C
• Part cooling fan: 0 - 70%
• Printing speed: 30 - 40 mm/sec.
• Use a wide brim of 10 mm
• Enclosure helps against warping
• Bed adhesion: Use a PP adhesion or a paper sticker

Properties:

• Density: 0.96 g/cm3
• Tensile modulus MPa 1450 ISO 527
• Tensile stress at Yield: 30 MPa
• Tensile strain at Yield: 7%
• Charpy impact (23°C): 4.0kJ/m2
• Charpy impact (-30°C): 4.5 kJ/m2
• Vicat softening temp.: 74 °C
• Shore hardness D 61

E-LENE is food safe and prints very well

* The first layer can be tricky: Use therefor a PolyEthylene printbed surface or paper (non-permanent adhesive) sticker as a print bed surface!

**This polyolefin filament needs to be dried before 3D printing

You use this polyethylene filament for printing food-safe 3D prints. E-LENE has a high density, is tough, can withstand temperatures of -30 ° C and has an excellent chemical and mechanical resistance.

PE filament also has an excellent layer adhesion, which makes E-LENE an excellent all-in-one filament. E-LENE is reeled on a spool per 750 grams. This polyethylene filament is available in a diameter of 1.75 mm and in a natural color.

*This polyolefin filament needs to be dried before 3D printing

** NB: Have you finished printing? Then do not leave any residue in your hot end due to possible blockages.

*** Always store E-LENE in the sealed resealable bag in a dry and dark place.

Curious about more functional filaments? Then scroll to www.plasticz.nl